Cronus Zen supports all versions of the Xbox® Series X|S console, and all official Xbox® Series X|S controllers.
Remember, when using Cronus Zen, any supported device (controllers, mice, keyboards) will work with your Xbox Series® X|S console! 🎮🚀
Xbox® Series X & Xbox® Series S Digital
Console Version | Supported |
|---|---|
Xbox® Series X | YES |
Xbox® Series S Digital | YES |
Cronus Zen supports all variants of the Xbox® Series X|S controllers (USB & Xbox Wireless Adapter - Bluetooth is not supported).
Xbox® Series X|S & Xbox® X|S Elite Series 2 Core
Controller Model | USB | Adapter | Bluetooth |
|---|---|---|---|
Xbox® X|S (1914) | YES | YES | NO |
Xbox® X|S Elite Series 2 Core | YES | YES | NO |
The following are third-party licensed Xbox® Series X|S & Elite Core controllers that have been verified to work with Cronus Zen either by USB or Xbox Wireless Adapter.
Note: Some Xbox® Series X|S and Xbox® One controllers share identical names, but one may be supported by Zen and the other may not, so it's a good idea to know which model you have. They're easy to identify by the extra 'Capture' button (see image below).
Xbox One & Xbox Series X|S Controllers
If you're using a licensed Xbox® Series X|S controller that works but not listed here, we'd love to know! Reach out to us at cronus.support. 🥰
Xbox® Series X|S Controller | USB | Adapter |
|---|---|---|
Gamesir G7 SE | YES* | NO |
Nacon RIG Pro Compact | YES | NO |
PDP Afterglow | YES | NO |
PowerA Fusion Pro 2 | YES | NO |
PowerA Fusion Pro 3 | YES | NO |
PowerA Spectra Infinity | YES | NO |
PowerA Enhanced | YES | NO |
Razer Star Wars (Boba Fett) | YES | YES |
Razer Star Wars (Mandalorian) | YES | YES |
Razer Star Wars (Rebel) | YES | YES |
Razer Wolverine v2 | YES | NO |
Razer Wolverine v2 Chroma | YES | NO |
Scuf Instinct | YES | YES |
Scuf Instinct Pro | YES | YES |
Turtle Beach Recon | YES | NO |
Turtle Beach REACT-R | YES | NO |
Victrix Gambit Dual Core | YES | NO |
GAMESIR G7 SE CONTROLLER*
Immerse yourself in a pinnacle gaming experience with the Xbox Series X|S Gamesir G7 SE Controller, showcasing the innovative Hall Effect Stick sensors in both left and right analog sticks for almost zero stick drift and enhanced in-game precision, notably with the Aim Assist & Anti-Recoil MODs.
For Cronus Zen compatibility, you must do the following:
Download the Gamesir Nexus app
Select the Update button and program to the latest version.
Once completed, select the Profiles button.
Profile 1 should be highlighted, select the Configure button.
Select the Sticks button at the top of the screen.
Set the Left Stick Range 'Initial' value to 0. Enable RAW.
Set the Right Stick Range 'Initial' value to 0. Enable RAW.
Move the sticks around until both X&Y reads 0.00%
Press A to confirm.
Connect Zen to your console from the CONSOLE/PC USB port.
Wait 5 seconds then connect the Gamesir controller to A1.Note: If you don't wait the controller will not power on (look for the White LED).
Tap Zen's reset button and after a few seconds the RGBs will change to GREEN.
You're now ready to play with peak precision!
Gamesir Nexus App
These controllers are NOT currently compatible with Cronus Zen:
Xbox® Series X|S ThrustMaster ESWAP S PRO
Xbox® Series X|S ThrustMaster ESWAP X PRO
All unlicensed Xbox controllers
All Flight Sticks
All H.O.T.A.S.
This guide will show you how to connect any controller to an Xbox® Series X|S console.
Game with any device on your Xbox® Series X|S
First make sure your Zen is updated to . If it isn't, you'll need to visit STEP 1: Update Firmware.
OK, Let's get after it.
Connect the Cronus Zen to your PC using the PROG USB port.
Open Zen Studio .
Select the Device panel.
Set the Emulator Output Protocol to XBOX ONE X/S.
Xbox® Series X|S Controller (USB):
Connect to the A1 USB port. That's it. 😁
Crossover Gameplay:
Other devices such as non-Xbox® controllers, mice, keyboards etc. use the A3 USB port, and also the A2 port if you need to connect two devices.
You can also use a secondary device alongside an Xbox® Series X|S controller such as a mouse for enhanced aiming, or a keypad with dozens of assigned MACROs.
Crossover Note:
An Xbox® Series X|S controller must be connected to A1 while using any crossover device on an Xbox® Series X|S console.
Bluetooth Pairing:
Tap Zen's Bluetooth pairing button (P2) for pairing mode, then...
DualSense® Controllers: There is currently no Bluetooth support. Use USB.
Xbox® Controllers: There is currently no Bluetooth support. Requires adapter.
Nintendo® Switch Controllers: Hold down Sync buttons for pairing mode.
DualShock® Controllers: Hold down SHARE + PS for pairing mode.
Wireless Adapters:
To achieve wireless support for Xbox® controllers, the Xbox Wireless Adapter is required. Plug it into A3, connect the Xbox® controller to A2 for a few seconds, then unplug. Soon, the LED on the Adapter and controller will turn solid white, indicating successful pairing.
The Astro® C40 adapter can also be connected to A3.
🔋 IMPORTANT
Your controller might not charge when connected via Zen. Ensure its fully charged or equipped with fresh batteries to prevent disconnections.
🎧 WIRED HEADSETS
Considering the wide variety of headsets, controllers, and consoles, we can't promise full audio functionality for every combo, especially third-party controllers. However, many official controller USB setups are compatible.
Give yours a try and find out! 🎮
